SUS420 stainless steel belt 65mn stainless steel belt 304 stainless steel belt, high quality and good price export high-quality thin steel belt, SUS420 stainless steel belt

Best Price 316l Slitting Stainless Steel Strip - Buy Stainless Steel Strip,Slitting Stainless Steel Strip,316l Slitting Stainless Steel Strip The 304 stainless steel strip has an unpolished (mill) surface, has been annealed, and meets American Society for Testing and Materials International ASTM A240 and SAE Aerospace Mater

Featured Products

Best Price 316l Slitting Stainless Steel Strip - Buy Stainless Steel Strip,Slitting Stainless Steel Strip,316l Slitting Stainless Steel Strip 

The 304 stainless steel strip has an unpolished (mill) surface, has been annealed, and meets American Society for Testing and Materials International ASTM A240 and SAE Aerospace Material Specifications AMS 5513 standards. The 304 stainless steel grade is a general-purpose material that combines corrosion resistance, weldability, and formability, making it the most commonly used grade of stainless steel. An austenitic stainless steel that is one of the 18-8 grades, 304 can be cold worked to increase its hardness and strength while maintaining most of its formability. The material is typically nonmagnetic but may become slightly magnetic when cold worked. It has been annealed to modify its properties after shaping.

Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. The chemical composition of each grade creates a grain structure that falls into one of five classes: austenitic, duplex, ferritic, martensitic, and precipitation hardening. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated. The duplex class offers high resistance to pitting and chloride stress corrosion cracking. Duplex grades are heat treatable and roughly twice as strong as austenitic grades. The ferritic class contains moderately formable and corrosion-resistant grades compared to other stainless steel classes, but they cannot be heat treated. The martensitic class includes some of the hardest and strongest stainless steel grades that also offer mild corrosion resistance, high hardness, and good formability. Martensitic grades can be heat treated. The precipitation-hardening (PH) class can be heat treated after fabrication to achieve some of the highest hardness ratings in stainless steel.

Tensile strength, used to indicate the material's overall strength, is the peak stress it can withstand before it breaks. Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Toughness describes the material's ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Formability indicates how easily the material can be permanently shaped. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded. Magnetism characterizes how much the material is repelled by or attracted to a magnet.

 
ProductHigh Precision 304 Stainless Steel strips
Material TypeFerrite stainless steel, magnetic; Austenitic stainless steel, Non-magnetic.
Material OriginTISCO, BAOSTEEL, JISCO, LISCO, BAOSTEEL
  
TechnologyCold Rolled
Thickness0.01 mm to 2.0mm
Width10mm to 400mm
Surface2B, 2D, BA, NO.4, HL, SB
EdgeSlit / Trim Edge
Other ServiceLeveling: improve flatness, esp. for items with high flatness request.
Skin-Pass: improve flatness, higher brightness
Protection1. Inter paper available
2. PVC protecting film available
 The sizes or thicknesses of stainless steel coil can be customized, if you need additional information,

 

please don't hesitate to contact us at any time.

All standard products are supplied without inter paper & film. If needed, please inform.
 
 Chemical Compositon% Mechanical Properties
Type304304L Type304304L
Carbon(C)≤0.08≤0.03 Brinell Hardness(HB)≤201≤201
Manganese(Mn)≤2.0≤2.0 Elongation%≥40≥40
Silicon(Si)≤1.0≤1.0 Tensile Strength(Mpa)≥520≥520
Chromium(Cr)18.0~20.018.0~20.0 Yield Strength(Mpa)≥205≥205
Nickl(Ni)8.0~10.58.0~12.0 HRB≤92≤92
Sulphur(S)≤0.03≤0.03    
Phosphorus(P)≤0.045≤0.035 

 Surface--stainless steel coils / strips

 
Surface FinishDefinitionApplication
2BThose finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster.Medical equipment, Food industry, Construction material, Kitchen utensils.
BAThose processed with bright heat treatment after cold rolling.Kitchen utensils, Electric equipment, Building construction.
NO.3Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001.Kitchen utensils, Building construction.
NO.4Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001.Kitchen utensils, Building construction, Medical equipment.
HLThose finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size.Building construction.
NO.1The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling.Chemical tank, pipe.


Yaoyi Warehouse

Ningbo Yaoyi Stainless Steel Co. Ltd. was founded in 1996. Yaoyi covers an area of 50 acres, and near the Ningbo airport. Over the years, the company mainly produce and sell different kinds of stainless steel coils ,tubes and sheets. It also independently developed one kind of high tensile non-magnetic stainless steel-Y1 and one kind of hard magnetic stainless steel-Y6.  Also, other products like SUS 201, 202, 301, 301Ni7, 304 and 316 and so on.

Yaoyi keeps the industry-leading quality for years. Because it had technological improvement on cold rolling mill and the heat treating process. Yaoyi is good at producing high hardness and high-tensile coils. Also, we specialize in customized material for different clients.

Our strength is the relationships with our customers, suppliers, and employees.  Moreover, the quality management system (REGISTERED TO ISO 9001:2008) ensures our quality and the service.


Packaging and Transportation



Test equipment

 
FAQ
Q: How long is your delivery time?
A: Generally it is 5 -10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q: DO YOU PROVIDE SAMPLES ? IS IT FREE OR EXTRA ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: WHAT IS YOUR TERMS OF PAYMENT ?
A:TT/LC Details as followings:
(1)100% T/T advance. ( For small order.)
(2) 30% T/T and balance against copy of documents.
(3)30% T/T advance, balance L/C at sight
(4) 30% T/T , balance L/C usance
(5)100% L/C usance.
(6)100% L/C at sight.



 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours